Animal Plush Patterns

How to Scale a Plush Pattern Up or Down

How to resize a stuffed animal pattern: calculate the scaling percentage, enlarge or reduce the pieces, fix seam allowances, adjust details and test with a prototype.

On this page
  1. The basic method
  2. Calculate the percentage
  3. Worked example
  4. Fix the seam allowance
  5. What changes when a plush gets bigger or smaller
  6. Adjust details
  7. Test before cutting
  8. Related

The basic method

To scale a plush pattern up or down, enlarge or reduce every pattern piece by the same percentage, then check the seam allowance, details and filling. The pieces must all be scaled by the same amount so they still fit together.

You can do it with:

  • A printer or copier. Most printers and PDF viewers let you set a custom scale percentage when printing. A copy shop can enlarge paper patterns.
  • A scanner or photo editor, if you want to resize and then print on multiple pages.
  • Pattern-drafting software or a PDF editor, which can scale precisely.
  • A grid method, for hand-drawn patterns, where you redraw on a larger or smaller grid.

Calculate the percentage

Pick one measurement on the original pattern, such as the body height or total length. Then use:

New size ÷ original size × 100 = scale percentage

If a pattern makes a toy 8 inches (20 cm) tall and you want it 12 inches (30 cm) tall:

12 ÷ 8 × 100 = 150%

To shrink the same pattern to 6 inches (15 cm):

6 ÷ 8 × 100 = 75%

Worked example

  1. Measure a reference piece on your printed pattern, for example the body height, and confirm it matches the size given in the instructions.
  2. Decide on your target size, and calculate the percentage.
  3. Print or copy every piece at that percentage.
  4. Measure the new pieces to confirm they changed as expected.
  5. Cut and label the new pieces.

For PDF patterns, many designers include a test square. After printing at your new scale, measure the square. If the instructions say the original square is 2 inches, at 150% it should measure 3 inches.

Fix the seam allowance

If a pattern includes a seam allowance in the pieces, scaling changes the seam allowance too. A 1/4 inch (6 mm) seam at 150% becomes 3/8 inch (about 9 mm). That is often fine if you sew accordingly, but you may find it simpler to keep your usual seam. Two ways to handle it:

  • Sew at the scaled seam allowance, if you have enough room to do so comfortably.
  • Trim or re-mark the pieces to your usual seam allowance by redrawing the outer cutting line.

If the pattern has no seam allowance, add your usual one after scaling, so it stays the same on every size.

What changes when a plush gets bigger or smaller

  • Volume grows faster than height. If you scale every dimension by 150%, the volume is roughly 3.4 times larger (1.5 × 1.5 × 1.5). So you will need much more filling than the original; see how much stuffing a stuffed animal needs. Reducing by 75% gives roughly 42% of the volume. These are approximate, but they show why a big plush uses so much stuffing.
  • Fabric matters more. Larger toys may need sturdier fabric or stronger seams, and heavy filling can strain thin fabric. Smaller toys may be better in lighter fabrics, since thick pile is hard to turn at small sizes.
  • Narrow parts become harder. Small tubes for arms and tails are difficult to turn when scaled down, so you may need to widen them. Large sizes can make limbs floppy, so consider firmer filling.
  • Curves behave differently. A tight curve on a small pattern may become a gentle one on a large pattern, and the reverse.

Adjust details

Not everything should scale with the body:

  • Eyes and noses: Choose sizes that look right, instead of scaling exactly. See how to tell what size safety eyes you have.
  • Embroidery: Thread thickness does not change with scale, so you may need to use more strands for a larger toy, or fewer for a smaller one.
  • Joints and wire: Use components that suit the new size and weight; see making poseable stuffed animals.
  • Ears and tails: Check that they look proportionate at the new size.

For young children’s toys, remember that making a toy smaller can create parts that are small enough to be a hazard.

Test before cutting

Cut and sew a prototype from inexpensive fabric before using your best material. This is especially useful when you scale more than about 25% in either direction. Compare the prototype with the original pattern’s photo, make notes, and adjust the pattern pieces if needed. If you are making many changes, you may want to redraw the pattern; see how to design your own plushie pattern.

Our guide to stuffed animal sewing patterns explains the pieces and markings you will be scaling, and the easy bunny pattern is a simple one to practice resizing on.

The complete guide to animal plush patterns

Stuffed Animal Sewing Patterns: A Guide to Soft Toy Animal Patterns
Read the guide

Keep exploring

Guides from other topics

All topics →

Cloth Doll Making for Beginners

A beginner's guide to making a cloth doll: the materials to buy, how to choose a free pattern, the basic sewing steps, and where to go for faces, hair and clothes.

Cloth Dolls 5 min read