The short answer
To sew a hole in a soft toy, use a ladder stitch, also called an invisible or blind stitch, with thread that matches the fabric. Tuck the stuffing back inside, anchor the thread, then take small stitches directly across from each other on each side of the opening and pull the thread gently so the edges close. Finish with a knot hidden at the seam.
What you need
- A hand-sewing needle
- Thread in a matching color. A stronger thread, such as nylon or upholstery thread, can be useful for toys that get heavy handling.
- Small scissors
- Extra stuffing, if some has been lost
- Optional: pins, a thimble or a curved upholstery needle for hard-to-reach spots
Step-by-step ladder stitch
- Prepare the opening. Push any stray stuffing back into the toy. If the toy has lost filling, add some fluffed polyester fiberfill before closing. If the edges are curled under, fold the raw edges inward so the fabric forms a clean fold on each side.
- Thread the needle. Cut a length of thread, about 12 inches (30 cm) is easy to handle, and tie a small knot at the end.
- Hide the knot. Insert the needle from inside the opening, or just beyond one end of the hole, so the knot sits inside the seam or stuffing.
- Make the first stitch. Bring the needle out along the folded edge on one side. Then go directly across to the opposite side and take a small stitch along the fold, parallel to the edge, about 1/8 to 1/4 inch (3 to 6 mm) long.
- Alternate sides. Keep stitching back and forth across the gap, like rungs on a ladder, picking up only the fold each time.
- Pull gently. After every few stitches, tug the thread to draw the two edges together. The stitches should disappear into the seam. Do not pull so hard that the fabric puckers.
- Finish. At the end of the opening, make a small knot close to the fabric, then push the needle into the stuffing a short distance away, bring it out, and pull. Snip the thread close to the surface so the end slips back inside.
Check the repair by squeezing the area gently and tugging lightly at the seam.
If the fabric itself is torn
If the toy has a rip in the fabric rather than an open seam:
- A clean tear: Bring the edges together and use a ladder stitch if the edges fold under, or a small whipstitch or a tiny running stitch from the inside.
- A frayed or weak edge: Stitch a small patch of similar fabric to the inside, then close the tear over it. This spreads the strain across a larger area.
- A hole where fabric is missing: A patch from matching fabric, such as felt or spare plush, can be appliquéd on top or stitched in from the inside.
If the fur or stuffing is missing
- Stuffing: Restore firmness with fresh fiberfill, and match the firmness of the rest of the toy. If the toy has gone flat generally, see how to puff up a plushie.
- Fur: For a spot where fur has worn away, you can sometimes blend the area by brushing nearby pile over it, or use a patch.
Tips
- Work in good light, and use a color of thread that is close to the fabric, since it blends in more easily with a bit darker than lighter.
- If the seam is under stress, such as a limb joint, use a stronger thread and make smaller stitches.
- For thick fur, pick fibers out of the seam with the needle tip as you go so they hide the thread.
- Practice on a scrap first if you have never done a ladder stitch.
Safety
If the toy is for a young child, check the rest of the toy at the same time. Look for loose eyes (replacing safety eyes), noses, buttons and other seams that may be about to open, and do not return the toy until you are sure it is secure. If you cannot make a safe repair, it may be better to retire the toy. For bigger repairs such as reattaching limbs, see mending stuffed animals.
Related
The ladder stitch is also how you close the turning gap on new toys, as in the easy bunny stuffed animal pattern, and our guide to stuffed animal sewing patterns covers other finishing basics.