Animal Plush Patterns

Sloth Plush Pattern with Long Dangling Arms

How to sew a sloth plush with long dangling arms: pattern pieces, shaping the arms and claws, the sleepy face with eye patches, and hugging or hanging variations.

On this page
  1. What makes a sloth plush
  2. Materials
  3. Pattern pieces
  4. Long dangling arms
  5. Face and eye patches
  6. Sewing instructions
  7. Hugging or hanging variation
  8. Safety
  9. Related

What makes a sloth plush

A sloth is easy to recognize from a few features: long arms with hooked claws, a rounded body, a flat, pale face with dark eye patches, and a gentle, sleepy smile. Because the shape is soft and relaxed, a sloth plush is more forgiving than a crisp, structured toy, and its long arms make it a natural huggable.

If you have never made a plush, start with something simple like the easy bunny pattern, then come back. The sloth is a good second or third project.

Materials

  • Brown, tan or gray fleece or minky for the body and arms
  • Cream or light tan fabric for the face
  • Dark brown or black felt for the eye patches and nose
  • Polyester fiberfill
  • Matching thread
  • Embroidery thread for the eyes, mouth and claws
  • Optional: a small amount of poly pellets for weight in a display toy, sewn into an inner pouch (making a weighted stuffed animal with poly pellets), and Velcro patches for the hands

Soft, cuddly fabrics suit the character, but they can stretch; see sewing minky without stretching or shifting. Fleece is easier for beginners.

Pattern pieces

  1. Body: An oval or pear shape. Cut 2.
  2. Head: A rounded shape, either a separate piece or part of the body. Cut 2.
  3. Face patch: A lighter heart or oval shape for the face. Cut 1.
  4. Eye patches: Dark teardrop shapes that sweep from the eye outward. Cut 2.
  5. Arms: Long, slim tubes, with a curved end for the claw. Cut 4 for two arms.
  6. Legs: Shorter tubes, with feet. Cut 4.
  7. Claws: Felt or stitched curves, three on each hand or foot.
  8. Ears: Optional, as sloth ears are small and often hidden in the fur.

For a different size, see how to scale a plush pattern up or down.

Long dangling arms

The arms are the signature feature. Here is how to make them well.

  • Make them wide enough. A tube about 2 to 3 inches (5 to 8 cm) wide is much easier to turn than a narrow one. Taper them slightly toward the hand.
  • Round the ends. Sew a curved end rather than a point, then clip the seam allowance closely.
  • Add the claw shape. You can curve the end of the arm by cutting it with a bend, or sew small stitches at the tip to form hooked fingers. Three curved claws made from felt strips or stitched lines are the classic look.
  • Fill lightly. For arms that dangle and drape, use less stuffing than you do in the body (how much stuffing a stuffed animal needs). Firm arms will stick out instead of hanging.
  • Keep them even. Measure both arms, since the length is obvious on a sloth.
  • Optional hands: For a toy that hugs or hangs from a shelf, a small Velcro patch on each hand lets the arms hold on. Only add Velcro to toys for older children or display pieces, and make sure it is firmly sewn.

If you want to make an arm pose that holds its shape, see making poseable stuffed animals.

Face and eye patches

The face carries the sloth’s personality.

  1. Appliqué the face patch onto the head front, in a lighter fabric.
  2. Add the eye patches, dark teardrops that slant down and outward.
  3. Embroider the eyes inside the patches as small, simple circles or half-moons. A half-closed look suits the sleepy character. For older children, small safety eyes can be placed in the patch.
  4. Add the nose as a small dark oval, with a soft curved mouth below.

Embroidered features are the safest option for babies and toddlers.

Sewing instructions

  1. Prepare the arms and legs. Sew each piece with right sides together, leaving the top open. Clip curves, turn, and fill lightly. Add claws.
  2. Appliqué and embroider the face on the front head piece.
  3. Pin the arms and legs to the right side of the front body piece, with the raw edges aligned. Place the arms near the top of the body and the legs near the bottom.
  4. Sew the front and back together, leaving a gap for turning at the bottom or the side.
  5. Clip the curves and turn.
  6. Stuff the body, firmly in the head and middle and a little less in the base, so the sloth slumps comfortably.
  7. Close the gap with a ladder stitch; the technique is covered in how to sew a hole in a soft toy.

Hugging or hanging variation

A sloth is often shown hanging from a branch. You can make a hugging sloth with extra-long arms that wrap around a person’s neck or a pillow, or a hanging display sloth with arms that loop over a rod or shelf. Make the arms longer than you think, and use a softer fill so they drape. For a display toy, weight in the hands or a small pellet pouch in the base can help the toy stay in place.

Safety

For babies and toddlers, avoid Velcro, pellets and hard eyes. Long arms and loose ties can be a hazard for small children, so for those toys keep the arms shorter and the construction simple. Check that stitches are strong.

For other animals with distinctive limbs, see the elephant plush with floppy ears and the octopus soft toy pattern. For general guidance, read our guide to stuffed animal sewing patterns.

The complete guide to animal plush patterns

Stuffed Animal Sewing Patterns: A Guide to Soft Toy Animal Patterns
Read the guide

Keep exploring

Guides from other topics

All topics →