Materials and Supplies

How do I know what size safety eyes I have?

Measure across the front of the eye in millimeters. Here's how to check safety eye size, what the other numbers mean, and how to choose a size for your toy.

On this page
  1. The short answer
  2. How to measure
  3. Other numbers that matter
  4. If you don’t have the packaging
  5. Choosing a size for your project
  6. Sizes and conversions

The short answer

Safety eye size is the diameter of the front of the eye, measured in millimeters. To find what you have, measure straight across the widest part of the eye’s face with a ruler or calipers. A common size such as 6 mm, 8 mm, 10 mm or 12 mm will measure close to that number.

How to measure

  1. Hold the eye face up on a flat surface.
  2. Place a millimeter ruler (or digital calipers) across the widest point of the front, through the center.
  3. Read the measurement. Round to the nearest whole millimeter.
  4. If you have a pair, measure both to check they match.

Calipers are the most accurate, and a ruler works well enough for most purposes. Measure the front face, not the washer or the post. For eyes with an eyelid or a rim, measure the full visible head.

Other numbers that matter

The face diameter is the “size,” but a few other dimensions affect whether an eye will work in your project:

  • Post (shank) length: the length from the back of the eye to the end of the post. A longer post is better for thick fabric or plush with deep pile, and a shorter one for thin fabric.
  • Post thickness: a thicker post needs a larger hole and stitches or fabric that can handle it.
  • Washer size: it should fit the post snugly and be large enough to spread the pressure behind the fabric.

Washers are generally designed for particular post sizes, and brands are not always interchangeable, so keep eyes and washers together.

If you don’t have the packaging

  • Measure the face diameter as above.
  • Compare against a set of eyes of known size, or a ruler, to check.
  • If there are markings on the back, they may show a size, though many eyes aren’t marked.
  • If you’re ordering replacements, order a small pack to test the fit before buying in bulk.

Eye sizes from different sellers can vary slightly, even when labeled the same, so measure rather than relying solely on a label.

Choosing a size for your project

There’s no single rule, but these are common starting points:

  • Small toys and tiny amigurumi often use small eyes, roughly 4 to 8 mm.
  • Medium toys often use roughly 8 to 12 mm.
  • Large plush may use eyes of 15 mm or more.

The yarn or fabric also matters. Chunky yarn or thick plush can swallow a small eye, while on fine yarn a large eye can look oversized. Hold a few sizes up against your project, or pin them in place, and look from a distance. For installation steps, see how to attach safety eyes to stuffed animals. If you’d rather skip hard eyes, see how to embroider eyes on amigurumi.

Sizes and conversions

Most sellers list sizes in millimeters. Some list inches. As a rough guide, 25.4 mm is one inch, so 12.7 mm is about half an inch. For more on what else to have on hand, see our supplies guide.

The complete guide to materials and supplies

Soft Toy Making Supplies and Materials Guide
Read the guide

Keep exploring

Guides from other topics

All topics →