The short answer
The easiest way to make a stuffed bear is to cut two matching bear shapes from soft fabric, sew them together with right sides facing, leave a gap, turn the bear right side out, stuff it with polyester fiberfill and close the gap with a hand-sewn ladder stitch. Fleece, flannel, cotton and old soft clothing all work. If you do not want to sew, you can also make a quick bear from yarn pompoms or a rolled towel, covered at the end.
What you need
- Fabric: about half a yard of fleece, flannel, cotton or recycled soft clothing is plenty for a small bear. Fleece is forgiving because it does not fray.
- Stuffing: polyester fiberfill. Fabric scraps can work, but fiberfill gives a softer result.
- Template: a printed bear pattern or one you draw yourself (see below).
- Sewing tools: a sewing machine or hand needle, thread, pins or clips, scissors and a fabric marker.
- Face materials: embroidery floss, felt or buttons. For a bear for a young child, stick to embroidery or sewn-on felt.
- A chopstick or similar tool to help push stuffing into the ears and limbs.
Draw a simple bear template
If you do not have a pattern, you can make a basic one:
- Fold a sheet of paper in half so the fold is the bear’s center line.
- Draw half of a bear outline against the fold: a round head with an ear, a short body, an arm and a leg, all in one piece.
- Keep the shapes chunky. Thin arms and legs are harder to turn and stuff.
- Round off sharp corners and tight curves.
- Cut along the line through both layers and unfold. You now have a symmetrical template.
Add your seam allowance when cutting the fabric, commonly between 1/4 and 1/2 inch, or draw it onto the template. For a more complete design with a gusseted head and jointed limbs, see the teddy bear sewing pattern guide.
Step-by-step: sew the bear
- Cut. Fold the fabric with right sides together, pin the template on and cut. You will get two mirrored bear shapes.
- Mark the gap. Mark a 2 to 3 inch opening on a straight side, such as the side of the body or a leg, so you know where not to sew.
- Pin or clip. Keep the right sides facing each other and pin all the way around.
- Sew. Stitch around the outline using the seam allowance, and backstitch at the start and the ends of the gap. Slow down on curves.
- Clip. Snip small notches in the seam allowance on curves and into inside corners, without cutting the stitches. This lets the bear lie smoothly when turned.
- Turn. Turn the bear right side out through the gap and use a blunt tool to push out ears, arms and legs.
- Stuff. Add small pieces of fiberfill at a time, starting with the head, arms and legs, then the body. Fill until the bear is firm but still soft.
- Close. Fold the raw edges of the gap inward and close it with a ladder stitch, pulling the thread snug so the stitches disappear.
- Add the face. Embroider or sew on the eyes, nose and mouth. Add a ribbon if you like.
If you prefer to put the face on before stuffing, work on the front piece before sewing the two pieces together. This is often neater.
Faces for a simple bear
- Embroidery: French knots or small satin stitches for eyes, with a satin-stitch triangle nose and a short curved line for a mouth. This is the safest option for babies and toddlers; see making a baby-safe stuffed animal.
- Felt: cut small circles and sew them on with small stitches.
- Buttons or safety eyes: these look neat, but can be a hazard for very young children. Use them only if the bear is not for a small child and they are fastened securely.
Fixing common problems
- Lumpy bear: pull fiberfill apart into small fluffy pieces, and add it gradually. See how to stuff a plushie evenly without lumps.
- Wrinkled curves: clip more notches next time, and sew with smaller stitches around tight curves.
- Fabric shifts or stretches: pin or clip generously. Add a light interfacing for thin or stretchy cotton.
- Gap shows after closing: use thread that matches the fabric and take smaller stitches.
- Floppy limbs: push in more stuffing.
No-sew alternatives
- Yarn pompom bear: wrap yarn around your fingers or a piece of cardboard to make pompoms for the head, body, ears and limbs. Tie them off tightly, trim, then tie or glue the pieces together and add a nose and eyes.
- Rolled towel bear: roll both sides of a square hand towel toward the center, fold it in half and twist or tie sections to form a bear shape. This is usually a display craft rather than a toy.
Where to go next
Once your first bear is done, try a gusseted head and limbs sewn in separately with the teddy bear sewing pattern guide. If you want to make a gift from clothing, see the memory bear guide. When you are ready for a bear whose arms and legs turn, learn about jointing with cotter pins and discs.