The short answer
To make clothes for a teddy bear, measure the bear’s chest, body length, arms and head, choose a simple loose style such as a t-shirt, dress or overalls, and sew it from lightweight fabric with an opening large enough for the bear’s head and limbs to fit through. You can draft a pattern by tracing around the bear on paper and adding seam allowance and ease.
Why bears are different from dolls
Teddy bears usually have rounder bodies, little or no waist, short thick arms and legs, and a large head compared to the body. That means:
- Clothes need to be wide enough at the chest and belly.
- Neck openings must be big enough for the head to pass through, or the garment needs an opening at the back.
- Sleeves and trouser legs should be loose, since bear arms and legs are often wide and do not bend at a defined joint.
Plush bears also vary a lot in size, so measuring the actual bear is more reliable than trusting a label.
Measure the bear
Use a soft tape to measure:
- Chest or belly circumference at the widest point
- Neck to base of body (for the length of a top)
- Head circumference (for hats and neck openings)
- Arm length and width, and leg length and width
Add ease: roughly 2.5 to 5 cm (1 to 2 inches) to the chest measurement is a reasonable starting range for most stuffed bears, but test it on the bear before cutting your final fabric.
Garments that suit teddy bears
- T-shirts and tunics: easy and quick, and look good on a round body.
- Dresses and pinafores: a gathered or A-line shape sits comfortably over a rounded belly.
- Overalls or dungarees: classic bear look, but trickier to fit.
- Scarves, capes and bandanas: almost no sewing or fitting.
- Hats and bonnets: use soft, stretchy fabric if possible.
Make a simple bear t-shirt
- Draw the pattern. Lay the bear on paper and trace a simple body shape from shoulder to hem, then add a rectangle for each sleeve. Make the shape wider than the bear.
- Add seam allowances. About 1 cm (3/8 inch) is a common choice. Add extra at the hem.
- Cut front and back. Cut two body pieces and two sleeves from lightweight cotton or a stretchy knit. Cut the back neck opening slightly lower than the front, or cut a slit in the back for easier dressing.
- Join the shoulders. Sew the shoulder seams, right sides together.
- Attach the sleeves. Sew each sleeve flat to the body piece before you close the side seams. This is easier than setting sleeves into a tiny tube.
- Sew the sides and underarms. Close from the sleeve cuff down to the hem in a single seam.
- Finish the edges. Hem the neck, sleeves and bottom. If the fabric is a knit, a simple fold and stitch is usually enough since it will not fray as much.
- Add a closing. Hook-and-loop tape or a snap at the back neck makes the garment easy to put on.
Try the shirt on the bear before the final seams, since each bear stuffs a little differently.
Fabric and fastenings
Thin woven cotton and stretchy cotton jersey are good, easy choices. Heavy fabrics add bulk and can look stiff on a small bear. For more detail, see the best fabric for sewing doll clothes, most of which applies to bears too.
If the bear is for a baby or young child, avoid buttons, beads or anything that could be pulled off. Use sewn-on or embroidered details instead. See making a baby-safe stuffed animal.
Tips
- Sew a quick practice garment from scrap fabric first.
- Loose styles are forgiving. Fitted ones need more precision.
- For stuffed animals that do not have clear arm joints, add elastic at the sleeve edge so the sleeves stay in place.
Related guides
A fuller guide to the process is in how to make plush doll clothes. If you want ready-made patterns, see where to find free patterns for doll clothes. If you are making the doll or bear itself, see cloth doll making for beginners or our teddy bear sewing pattern.